Crossover Installation

I decided to mount my crossovers in the stock amplifier location. I wanted them easily accessible and out of harms way. This was quite simple to do. I removed the mounting bracket with the factory amp attached, removed the factory amp, and measured the bracket. I cut a piece of MDF to fit and screwed it to the factory bracket using short wood screws. I then mounted the crossovers to the board. I placed the rear A5i/m crossovers on the bottom half and the 335is crossovers on the top. The reason for this is the A5i/m crossovers have no adjustable settings and the 335is crossovers do. I wanted them available without removing the CD changer.